0.95W SIMATIC ET200SP Cpu SIMATIC 6ES7134-6HB00-0CA1

SIMATIC ET 200SP SIMATIC 6ES7134-6HB00-0CA1

I. Product Description:

The SIMATIC 6ES7134-6HB00-0CA1 is a high-performance (High Feature) analog input module from SIMATIC’ SIMATIC ET 200SP series; its full model number is AI 2×U/I 2-/4-wire HF. It provides two differential input channels capable of acquiring high-precision voltage or current signals, making it suitable for applications with high requirements for accuracy and functionality

Number of Channels 2 differential input channels

Signal Type Voltage or current

Resolution Voltage: 16 bits including sign bit; Current: 15 bits

Accuracy ±0.1% (at 25°C)

Supply Voltage 24 V DC

Typical Power Consumption 0.95 W

II. Product Specifications:

SIMATIC 6ES7134-6HB00-0CA1｜SIMATIC ET 200SP AI 2xU/I 2-/4-WIRE HF Analog Input Module

Input Signal Types: Voltage and current;
Voltage Input Ranges: 0 to 10 V, 1 to 5 V, -10 to +10 V, and -5 to +5 V;
Current Input Ranges: 0 to 20 mA, 4 to 20 mA, and -20 to +20 mA;
Resolution: 15 bit for unipolar ranges; 16 bit including sign for bipolar ranges;
Input Resistance, Voltage: 75 kΩ;
Input Resistance, Current: 130 Ω;
Measurement Principle: Sigma-delta;
Integration Time: Parameterizable;
Conversion Time: Approximately 68.2 / 23 / 19.2 / 10.45 / 5.40 / 2.85 / 1.6 / 0.9 ms per channel, depending on configuration;
Interference Frequency Suppression: 16.6 / 50 / 60 / 300 / 600 / 1,200 / 2,400 / 4,800 Hz;
Measured Value Smoothing: 6 levels, including none, 2-fold, 4-fold, 8-fold, 16-fold, and 32-fold;
Basic Accuracy: ±0.1%;
Cable Length: Up to 1,000 m for shielded cables; up to 200 m for voltage measurement;
Channel Diagnostics: Supported;
Wire-Break Detection: Supported;
Short-Circuit Protection: Supported channel by channel;
Overrange / Underrange Detection: Supported;
Reparameterization During RUN: Supported;
Calibration During RUN: Supported;
Oversampling: Supported;
Supply Voltage: 24 V DC;
Permitted Supply Voltage Range: 19.2 to 28.8 V DC;
Current Consumption: Approximately 25 mA;
Typical Power Loss: Approximately 0.7 W;
Electrical Isolation: Inputs electrically isolated from the backplane bus;
Channel-to-Channel Isolation: Supported according to configured measurement mode;
Status Indication: Diagnostic and channel status indication supported;
I&M Data: Supported;
Firmware Update: Supported;
Compatible BaseUnits: BU type A0 and A1;
Color Code: CC05;
Engineering Software: STEP 7 / TIA Portal;
System Compatibility: SIMATIC ET 200SP distributed I/O system;
Mounting: Installation on a standard DIN rail through the ET 200SP BaseUnit;
Protection Rating: IP20;
Operating Temperature: -30 to 60 °C for horizontal installation;
Operating Temperature, Vertical Installation: -30 to 50 °C;
Maximum Installation Altitude: Up to 5,000 m above sea level;
Dimensions (W × H × D): Approximately 15 × 73 × 58 mm;
Net Weight: Approximately 32 g;
Product Status: Active Product;
Typical Applications: Analog voltage and current signal acquisition, sensor and transmitter measurement, process instrumentation, pressure measurement, flow measurement, level measurement, industrial automation, machine automation, and distributed analog input applications based on the SIMATIC ET 200SP 

III. Technical Parameters:

SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/-0.1%

IV. Industries Served:

SIMATIC 6ES7134-6HB00-0CA1: This module’s most typical application area. It can accurately acquire current signals (4–20 mA) from field transmitters—such as those for pressure, flow, and level—as well as voltage signals for position, speed, and other parameters.

The module’s flexible, distributed deployment makes it ideal for applications with widely dispersed equipment. In the automated liquid level monitoring system project for the tank farm at the Port of Liepāja in Latvia, the ET 200SP remote I/O from this module family served as a core component. It was used to collect key data—such as liquid levels and temperatures—from storage tanks in real time and communicated with sensors via the HART protocol, enabling intelligent management of the port’s critical infrastructure.

V. Product Certificates:

VI. FAQ:

1,How to buy the product?

Contact our sales professionals online. A variety of contact options are available:

WhatsAPP: +8619731602085

WeChat: Susan20241118

E-mail: contact@szlyzn.com

Or click on the Contact Us page, enter your name, email, phone number and specific request, submit it to our customer service and we will contact you within 24 hours.

2,Are the products all genuine? Is the quality guaranteed?

Our products are 100% guaranteed quality, 100% guaranteed authentic, regular channel, you can buy with confidence. Each product can be checked for authenticity, all from major genuine brands, if you have any questions, please feel free to contact our after-sales service.

3. What should I do if I can't find what I want?

You can do an exact/fuzzy search based on the product model or brand. If you still can't find it, you can feedback the model number or brand of the desired product to our sales staff.