SIMATIC 0.065Kg ET 200SP 6ES7136-6DB00-0CA0 24 V DC

SIMATIC ET 200SP 6ES7136-6DB00-0CA0 24 V DC

I. Product Description:

The SIMATIC 6ES7136-6DB00-0CA0 is a fail-safe digital output module for the SIMATIC ET 200SP distributed I/O system. Its primary function is to safely and reliably control the operation of safety-related actuators (such as contactors and relays)—including emergency stops and safety doors—in industrial automation systems

This fail-safe digital output module features 4 channels with 24 V DC, 2 A output. It is a PM (P-M switch) type, high-frequency (HF) version.

It has 4 transistor outputs with a rated voltage of 24 V DC, a maximum output current of 2 A per channel, and a maximum total module current of 6 A.

It supports resistive, inductive, and lighting loads. For example, with resistive loads, the switching frequency can reach up to 30 Hz.

II. Product Specifications:

SIMATIC 6ES7136-6DB00-0CA0｜SIMATIC ET 200SP F-DQ 4x24VDC/2A PM HF Safety Digital Output Module

Output Type: Transistor;
Output Configuration: PM switching;
Rated Output Voltage: 24 V DC;
Permitted Supply Voltage Range: 19.2 to 28.8 V DC;
Rated Output Current: 2 A per channel;
Maximum Total Output Current: 6 A per module;
Maximum Lamp Load: 10 W per output;
Load Resistance Range: 12 to 2,000 Ω;
Signal "1" Output Voltage: Minimum 24 V DC at rated load;
Signal "0" Residual Current: Maximum 0.5 mA;
Short-Circuit Protection: Supported;
Short-Circuit Response Threshold: Approximately >3.3 A;
Open-Circuit Detection: Supported;
Open-Circuit Detection Threshold: Approximately 8 mA;
Overload Protection: Supported;
Overload Response Threshold: Approximately 2.9 A;
Inductive Load Switching: Supported;
Inductive Shutdown Voltage Limitation: Approximately -2 × 47 V;
Switching Frequency with Resistive Load: Maximum 30 Hz;
Switching Frequency with Inductive Load: Maximum 0.1 Hz;
Switching Frequency with Lamp Load: Maximum 10 Hz;
Cable Length: Up to 1,000 m for shielded cables and up to 500 m for unshielded cables;
Output Status Indication: Green LED per channel;
Diagnostic Indication: Red LED for channel diagnostics;
Module Diagnostic Indication: Green/red DIAG LED;
Supply Voltage Indication: Green PWR LED;
Safety Integrity Level: SIL 3 according to IEC 61508;
Performance Level: PL e according to ISO 13849-1;
PROFIsafe: Supported;
Safety Functions: Suitable for fail-safe applications;
Diagnostic Functions: Module diagnostics, channel diagnostics, supply voltage monitoring, short-circuit detection, open-circuit detection, and overload detection;
Diagnostic Alarm: Supported;
Hardware Interrupt: Not supported;
Substitute Value Output: Not supported;
I&M Data: I&M0 to I&M3 supported;
Supply Voltage: 24 V DC;
Backplane Bus Current Consumption: Maximum 21 mA;
Power Consumption from Backplane Bus: Approximately 70 mW;
Typical Power Loss: Approximately 4 W;
Potential Isolation: Outputs electrically isolated from the backplane bus;
Channel-to-Channel Isolation: Not provided;
Compatible BaseUnit: BU type A0;
Engineering Software: STEP 7 / TIA Portal;
TIA Portal Compatibility: From V12;
STEP 7 Compatibility: From V5.5 SP3;
PROFINET Configuration: GSDML V2.31 or higher;
Automatic Coding: Supported;
Electronic Coding Element: Type F;
System Compatibility: SIMATIC ET 200SP distributed I/O system;
Mounting: Installation on a standard DIN rail through the ET 200SP BaseUnit;
Module Width: 15 mm;
Protection Rating: IP20;
Operating Temperature: 0 to 60 °C for horizontal installation;
Operating Temperature, Vertical Installation: 0 to 50 °C;
Maximum Installation Altitude: Up to 4,000 m above sea level;
Dimensions (W × H × D): Approximately 15 × 73 × 58 mm;
Net Weight: Approximately 57 g;
Product Status: Active Product;
Successor Model: 6ES7136-6DB01-0CA0;
Typical Applications: Emergency-stop circuits, safety door monitoring, safety valves, contactors, motor control, machine guarding, conveyor safety systems, industrial machinery, fail-safe actuator control, and safety-related distributed I/O applications based on the SIMATIC ET 200SP platform

III. Technical Parameters:

SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)

IV. Industries Served:

SIMATIC 6ES7136-6DB00-0CA0 Failsafe Digital Output Module

For the most critical applications. The module receives commands from a safety controller (such as the S7-1500F) to directly control safety actuators such as emergency stop circuits, safety door locks, and safety light curtains.

It can be used in conjunction with the ET 200SP system’s failsafe motor starters to ensure safe disengagement of motor loads.

V. Why choose us?

We source directly from China’s Tier 1 channels, eliminating all middleman markups. This means you get competitive prices close to factory cost, and we pass those savings on to you as profit or budget flexibility for your projects.

Don’t let stockouts slow down your project schedule. For popular models like the S7-1500 and G120, which are frequently purchased, we always maintain high levels of in-stock inventory. The moment you place your order, the goods are already ready in our warehouse. Within 1–3 business days, you’ll receive the tracking number for your international express shipment. Whether your factory is in the Middle East, Southeast Asia, or across Europe and the Americas, our global logistics network helps you reclaim valuable time.

From precision manufacturing in Europe to oil and gas fields in the Middle East, and electronics assembly lines in Southeast Asia, our products and solutions have withstood the test of demanding operating conditions around the world. We deeply understand the unique characteristics of each market, and this global experience is the guarantee of your project’s successful implementation.

We don’t just sell products—we provide the technical support that keeps your equipment running smoothly. Whether you’re facing challenges with product selection, encountering commissioning errors, or dealing with unexpected failures, our technical team is always on standby to ensure your production line issues receive a professional response—not just a voicemail.

VI. FAQ:

1,How to buy the product?

Contact our sales professionals online. A variety of contact options are available:

WhatsAPP: +8619731602085

WeChat: Susan20241118

E-mail: contact@szlyzn.com

Or click on the Contact Us page, enter your name, email, phone number and specific request, submit it to our customer service and we will contact you within 24 hours.

2,Are the products all genuine? Is the quality guaranteed?

Our products are 100% guaranteed quality, 100% guaranteed authentic, regular channel, you can buy with confidence. Each product can be checked for authenticity, all from major genuine brands, if you have any questions, please feel free to contact our after-sales service.

3. What should I do if I can't find what I want?

You can do an exact/fuzzy search based on the product model or brand. If you still can't find it, you can feedback the model number or brand of the desired product to our sales staff.