0.047Kg SIMATIC ET 200SP SIMATIC 6ES7138-6AA01-0BA0

SIMATIC ET 200SP SIMATIC 6ES7138-6AA01-0BA0

I. Product Description:

The SIMATIC 6ES7138-6AA01-0BA0 is a process module for the SIMATIC SIMATIC ET 200SP distributed I/O system; its full model number is TM Count 1x24V.

Unlike standard I/O modules, it features a built-in microprocessor that enables it to independently perform signal preprocessing tasks—such as high-speed counting and frequency measurement—at the module level.

It features one counting channel, specifically designed for 24V incremental encoders or pulse encoders. It supports three signal inputs (A, B, N) and is compatible with source, sink, or push-pull encoders and sensors

3 digital inputs (DI)

2 digital outputs (DQ)

Requires a 24V DC power supply (permissible range: 19.2V to 28.8V), features reverse polarity protection, and has a typical power consumption of only 1W

II. Product Specifications:

SIMATIC 6ES7138-6AA01-0BA0｜SIMATIC ET 200SP TM Count 1x24V Technology Module

Encoder Interface: 1 × 24 V encoder interface;
Compatible Encoder Types: 24 V incremental encoder and pulse encoder;
Incremental Encoder: Supported;
A/B Phase-Shifted Signals: Supported;
Zero Track: Supported;
Input Frequency: Up to 200 kHz;
Maximum Counting Frequency: Up to 800 kHz with quadruple evaluation;
Counting Modes: Single, double, and quadruple evaluation;
Digital Inputs: 3;
Digital Input Type: 24 V DC, IEC 61131-2 Type 3;
Digital Outputs: 2;
Digital Output Type: Transistor;
Output Current: 0.5 A per output;
Maximum Output Current: 0.6 A per output;
Maximum Total Output Current: 1 A per module;
Output Switching Frequency: Up to 10 kHz with resistive load;
Output Delay: Maximum 50 μs;
Encoder Supply: 24 V DC;
Encoder Supply Current: Up to 300 mA;
Encoder Supply Protection: Electronic and thermal short-circuit protection;
2-Wire Sensor Support: Supported;
Maximum Quiescent Current for 2-Wire Sensor: 1.5 mA;
Input Signal Voltage: -30 to 30 V DC;
Signal "1" Input Voltage: Typically 15 to 30 V DC;
Signal "0" Input Voltage: Typically -30 to 5 V DC;
Signal Filtering: Parameterizable;
Cable Length: Up to 600 m for shielded encoder cables, depending on encoder and input frequency;
Maximum Cable Length at 200 kHz: Up to 50 m, depending on encoder and cable quality;
Supply Voltage: 24 V DC;
Permitted Supply Voltage Range: 19.2 to 28.8 V DC;
Reverse Polarity Protection: Supported;
Maximum Current Consumption: 60 mA without load;
Typical Power Loss: 1 W;
Address Space: 16 bytes input and 12 bytes output; Fast Mode uses 4 bytes input and 0 bytes output;
Motion Control: Supported;
Fast Mode: Supported;
Measured Value Functions: Supported;
Comparison Value Switching: Supported;
Digital Output Control: Supported through comparison values;
Interrupt Functions: Supported;
Diagnostic Functions: Module, channel, and encoder diagnostics supported;
I&M Data: I&M0 to I&M3 supported;
Firmware Update: Supported;
Firmware Version: V2.0;
Compatible BaseUnit: BU type A0;
Color Code: CC00;
Engineering Software: STEP 7 / TIA Portal;
STEP 7 TIA Portal Version: V15 SP1 or higher;
PROFINET GSDML: V2.34;
PROFIBUS GSD: Revision 3 and Revision 5 or higher;
System Compatibility: SIMATIC ET 200SP distributed I/O system;
Mounting: Installation on a standard DIN rail through a compatible BaseUnit;
Protection Rating: IP20;
Operating Temperature: -30 to 60 °C;
Storage / Transport Temperature: -40 to 70 °C;
Maximum Installation Altitude: Up to 5,000 m above sea level;
Dimensions (W × H × D): Approximately 15 × 73 × 58 mm;
Net Weight: Approximately 49 g;
Typical Applications: High-speed counting, pulse measurement, encoder signal acquisition, position measurement, speed measurement, frequency measurement, length measurement, motion control, machine automation, conveyor systems, packaging equipment, production lines, and distributed automation systems based on the SIMATIC ET 200SP platform.

III. Technical Parameters:

SIMATIC ET 200SP, TM count 1x 24 V Counter module, 1 channel for 24 V incremental encoder or pulse encoder, 3 DI, 2 DQ Suitable for BU type A0, packing quantity: 1 unit,

IV. Industries Served:

Used for precise control of packaging material conveyance and cutting length, as well as product counting on high-speed production lines

Used for position detection and screw tightening angle control on automated assembly lines

In industries such as chemicals and metallurgy, used in conjunction with flow meters, tachometers, and other equipment to perform precise process monitoring and data acquisition

V. Why choose us?

Pricing: We source directly from China’s Tier 1 channels, eliminating all middleman markups. This means you get competitive prices close to factory cost, and we pass those savings on to you as profit or budget flexibility for your projects.

Inventory and Lead Times: Don’t let stockouts slow down your project. We always maintain ample inventory for best-selling and frequently purchased models such as the S7-300, S7-1200, S7-1500, SIMATIC HMI, and G120. The moment you place your order, the goods are already ready in our warehouse. Within 1–3 business days, you’ll receive an international express tracking number. Whether your factory is located in the Middle East, Southeast Asia, or across Europe and the Americas, our global logistics network helps you save valuable time.

After-Sales Service: We don’t just sell products—we provide the technical support needed to keep your equipment running smoothly. Whether you’re facing challenges with product selection, encountering commissioning errors, or dealing with unexpected malfunctions, our technical team is always on standby to ensure your production line issues receive a professional response—not just a voicemail.

VI. FAQ:

1,How to buy the product?

Contact our sales professionals online. A variety of contact options are available:

WhatsAPP: +8619731602085

WeChat: Susan20241118

E-mail: contact@szlyzn.com

Or click on the Contact Us page, enter your name, email, phone number and specific request, submit it to our customer service and we will contact you within 24 hours.

2,Are the products all genuine? Is the quality guaranteed?

Our products are 100% guaranteed quality, 100% guaranteed authentic, regular channel, you can buy with confidence. Each product can be checked for authenticity, all from major genuine brands, if you have any questions, please feel free to contact our after-sales service 

3. What should I do if I can't find what I want?

You can do an exact/fuzzy search based on the product model or brand. If you still can't find it, you can feedback the model number or brand of the desired product to our sales staff.

4. How is the product delivered? Is it safe?

Various delivery methods and regular delivery channels, we will make different packages for different products and strictly guarantee the safety of the products.

Ground, air and sea transportation

DHL/FedEx/UPS/EMS/SF Express/TNT/Depon Express...

5. What are the payment methods?

01: Alipay payment: choose Alipay payment, the system will automatically generate the payment QR code, the customer opens the Alipay on the cell phone and scans the code to pay.

02: Online online banking: support more than 200 banks and financial institutions such as Industrial and Commercial Bank of China, Agricultural Bank of China, Bank of China, Construction Bank, Bank of Communications, Postal Savings Bank, etc., support credit card, savings card, CBI card, to fully meet the customer's payment needs.

03: Offline Payment: After choosing offline payment, customers can pay the payment to our corporate account through transfer, remittance and other offline payment methods. The account number can be viewed on the order payment page. The offline transfer amount and the order settlement amount must be the same.

6,If there is a problem, how to return or exchange the goods?

Customized products cannot be returned unless there is a quality issue, and customized products cannot be canceled.

We only support returns on new and original products. Therefore, this rarely happens.

If a customer requests a return or exchange of a standard product or one of our in-stock products without a valid reason, the customer shall be responsible for all costs incurred for the return or exchange.

Contact information for returns and exchanges:

F-mail: contact@szlyzn.com