4mA To 20mA SIMATIC ET 200SP 6ES7134-6GF00-0AA1

SIMATIC ET 200SP 6ES7134-6GF00-0AA1

I. Product Description:

The SIMATIC 6ES7134-6GF00-0AA1 is an analog input module for the SIMATIC SIMATIC ET 200SP distributed I/O system; its full model number is AI 8xI 2-/4-wire BA. It is a basic (BA) module primarily used to acquire standard current signals from field sensors

8 single-ended input channels, specifically designed for current measurement, supporting connection to 2-wire and 4-wire transmitters

4 mA to 20 mA (15-bit)

0 mA to 20 mA (15-bit)

±20 mA (16-bit, signed)

II. Product Specifications:

SIMATIC 6ES7134-6GF00-0AA1｜SIMATIC ET 200SP AI 8xI 2-/4-wire Basic Analog Input Module

Sensor Connection: 2-wire and 4-wire transducers;
Input Signal Range: 0 to 20 mA, 4 to 20 mA, and ±20 mA;
Resolution: 15 bit for 0 to 20 mA and 4 to 20 mA; 16 bit including sign for ±20 mA;
Input Resistance: 100 Ω for 0 to 20 mA and 4 to 20 mA;
Maximum Permissible Input Current: 50 mA;
Cycle Time: Minimum 1 ms per channel;
Conversion Time: Configurable according to selected integration time and resolution;
Integration Time: Parameterizable;
Interference Suppression: 16.67 Hz, 50 Hz, 60 Hz, and 4,800 Hz;
Measured Value Smoothing: 4 configurable levels;
Basic Error Limit: ±0.3% of input range at 25 °C;
Operational Error Limit: ±0.5% of input range over the specified temperature range;
Linearity Error: ±0.01% of input range;
Temperature Error: ±0.005% per K;
Cable Length: Up to 200 m for shielded signal cables;
Supply Voltage: 24 V DC;
Permitted Supply Voltage Range: 19.2 to 28.8 V DC;
Reverse Polarity Protection: Supported;
Current Consumption: Approximately 25 mA at rated voltage with all channels active and no load;
Encoder Supply: 24 V DC;
Encoder Supply Short-Circuit Protection: Supported;
Maximum Encoder Supply Current: 0.7 A total for all channels;
Power Loss: Approximately 0.7 W without encoder supply voltage;
Address Space: Up to 16 bytes per module;
Diagnostic Functions: Module diagnostics supported;
Diagnostic Alarm: Supported;
Limit Value Alarm: Not supported;
Reparameterization During RUN: Supported;
Calibration During RUN: Not supported;
Oversampling: Not supported;
MSI: Not supported;
I&M Data: I&M0 to I&M3 supported;
Firmware Update: Supported;
Mechanical Coding: Type A;
Compatible BaseUnits: BU type A0 and A1;
Color Code: CC01;
Engineering Software: STEP 7 / TIA Portal;
PROFINET Configuration: Supported via GSDML;
PROFIBUS Configuration: Supported via GSD;
System Compatibility: SIMATIC ET 200SP distributed I/O system;
Mounting: Installation on a standard DIN rail through the ET 200SP BaseUnit;
Protection Rating: IP20;
Operating Temperature: -30 to 60 °C;
Storage / Transport Temperature: -40 to 70 °C;
Maximum Installation Altitude: Up to 5,000 m above sea level;
Dimensions (W × H × D): Approximately 15 × 73 × 58 mm;
Net Weight: Approximately 31 g;
Typical Applications: Analog current signal acquisition, 2-wire transmitter measurement, 4-wire sensor measurement, process instrumentation, pressure measurement, flow measurement, level measurement, temperature transmitter interfaces, industrial automation, and distributed analog input applications based on the SIMATIC ET 200SP platform

III. Technical Parameters:

SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit

IV. Industries Served:

As part of the ET 200SP distributed I/O system, the core value of the SIMATIC 6ES7134-6GF00-0AA1 analog input module lies in its role as a key component for building flexible and efficient distributed control systems. It is particularly well-suited for medium- to large-scale automation projects with widely distributed equipment and a large number of signal points

In large-scale automotive production lines, it is used to collect signals from various sensors—such as temperature, pressure, and flow—located throughout the workshop in a decentralized manner.

In scenarios with dispersed equipment, such as metallurgical plants and logistics and warehousing systems, it addresses the challenges associated with centralized cabling.

V. Product Certificates:

VI. FAQ:

1,How to buy the product?

Contact our sales professionals online. A variety of contact options are available:

WhatsAPP: +8619731602085

WeChat: Susan20241118

E-mail: contact@szlyzn.com

Or click on the Contact Us page, enter your name, email, phone number and specific request, submit it to our customer service and we will contact you within 24 hours.

2,Are the products all genuine? Is the quality guaranteed?

Our products are 100% guaranteed quality, 100% guaranteed authentic, regular channel, you can buy with confidence. Each product can be checked for authenticity, all from major genuine brands, if you have any questions, please feel free to contact our after-sales service.

3. What should I do if I can't find what I want?

You can do an exact/fuzzy search based on the product model or brand. If you still can't find it, you can feedback the model number or brand of the desired product to our sales staff.

4. How is the product delivered? Is it safe?

Various delivery methods and regular delivery channels, we will make different packages for different products and strictly guarantee the safety of the products.

Ground, air and sea transportation

DHL/FedEx/UPS/EMS/SF Express/TNT/Depon Express...

5. What are the payment methods?

01: Alipay payment: choose Alipay payment, the system will automatically generate the payment QR code, the customer opens the Alipay on the cell phone and scans the code to pay.

02: Online online banking: support more than 200 banks and financial institutions such as Industrial and Commercial Bank of China, Agricultural Bank of China, Bank of China, Construction Bank, Bank of Communications, Postal Savings Bank, etc., support credit card, savings card, CBI card, to fully meet the customer's payment needs.

03: Offline Payment: After choosing offline payment, customers can pay the payment to our corporate account through transfer, remittance and other offline payment methods. The account number can be viewed on the order payment page. The offline transfer amount and the order settlement amount must be the same.